ESP8266 WeMos D1 Mini TB6612FNG Motor Driver Shield

ESP8266 WeMos D1 Mini TB6612FNG Motor Driver Shield
  • Product Code:SQ6540
  • Availability: In Stock
  • $1.90
  • Ex Tax:$1.90
This product has a minimum quantity of 4

Tags: WeMos D1 Mini, TB6612FNG, Motor Driver Shield, ESP8266 Shield, Wifi Motor Driver

ESP8266 WeMos D1 Mini TB6612FNG Dual Motor Driver Shield is a WeMos motor driver shield board that is developed by WEMOS Electronic developer compatible with WeMos d1 mini ESP8266 D1 boards. This shield is a peripheral board that can add the capability of driving and controlling two DC motor up to 15VDC on the I2C serial bus to the ESP8266 boards. This driver board can be supplied with a TTL logic level of 3.3V or 5V DC.
The ESP8266 series module is based on an ESP8266 WiFi module and one and more peripheral board. The ESP8266 boards are WIFI Arduino shield boards with a 160MHz, 32bit self processor and TCP/IP protocol, that can add Wi-Fi communication capability to the Arduino and microcontroller boards and also supporting the APSD and VOIP protocol. The ESP8266 module has enough processing capability and storage to be added with other simple boards with at least expansion up-front and minimum loading during runtime. The ESP8266 development board is interfaced with other boards through the I2C, UART, and SPI serial communication protocol. Communication with ESP8266 and its configuration is performed through the "AT Command" instructions. The ESP8266 can incorporate with another simple usual board such as this micro switchboard, the sensor boards, driver boards, and so on, to add WIFI capability to these boards. So all the ESP8266 boards have uniform interfaces includes GPIO, I2C, UART, and SPI serial communication header pins.  

I2C interface
Standby control to save power
CW/CCW/short brake/stop motor control modes

Power supply voltage: VM=15V max
Output current: Iout=1.2A(average) / 3.2A (peak)
Size: 25.8mm x 28.1mm x 5mm

Pins Description:
VM: Motor power supply + (Max 15Vdc)
GND: Motor power supply  
A1 A2: Motor A
B1 B2: Motor B
S: Standby control port (in IO mode)

Standby Control Mode:
I2C mode: Control TB6612's STBY with I2C protocol
IO mode: Control TB6612's STBY with  "S" pin

Reset mode:
Short: reset with d1 mini (reset at power on or press d1 mini's reset button)
Open: reset by DTR pin

Package Include:
1 x Motor Driver Shield

Interface Type I2C
Motor Specifications
Logic Voltage 2.7V to 5.5V
Motor voltage 15 VDC (Max)
Electrical Parameters
Output Current 1.2A (RMS) per Channel
Physical Parameters
Size 25.8 mm x 28.1 mm x 5 mm

Write a review

Note: HTML is not translated!
   Bad           Good
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout