CJMCU u-blox MAX-7Q Module
- Brands CJMCU
- Product Code:SQ2146
- Availability:In Stock
- $24.00
- Ex Tax:$24.00
Tags: GPS Module, GNSS Module, ublox Module, Position Module, GNNS Engine
Description:
The MAX-7 series of standalone GNSS modules is built on the exceptional performance of the u-blox 7 multi-GNSS (GPS, GLONASS, QZSS and SBAS) engine. The MAX-7 series delivers high sensitivity and minimal acquisition times in the ultra compact MAX form factor.
The MAX-7 series provides maximum sensitivity while main taining low system power. The MAX-7C is optimized for cost sensitive applications. The MAX-7Q provides best performance and lowest power, while the MAX-7W provides best performance and is optimized for active antennas. The industry proven MAX form factor allows easy migration from MAX-6 modules. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments.
The MAX-7 series combines a high level of integration capability with flexible connectivity options in a miniature package.
This makes it perfectly suited for industrial and mass-market end products with strict size and cost requirements. The DDC (I2 C compliant) interface provides connectivity and enables
synergies with u-blox cellular modules.
CJMCU u-blox MAX-7Q GPS-GNSS Module With Antenna [10Hz] is an ultra-low-power standalone GPS module that is developed based on MAX-7Q u-blox 7 GNSS modules chip. This positioning chip with a highly compact size of LCC package is a GNNS engine for GPS/QZSS, GLONASS positioning devices.
CJMCU u-blox MAX-7Q module Application:
- industrial
- mass-market application
- electronic machine
CJMCU u-blox MAX-7Q module Features:
- Chip: u-blox MAX-7Q
- SuperSense Indoor GPS: -162dBm
- Input Voltage: 5V
- Interface: I2C (SDA,SCL) and Uart (Tx,Rx)
- u-blox 7 Multi-GNSS engine for GPS/QZSS L1 C/A, GLONASS L1 FDMA, SBAS: WAAS, EGNOS, MSAS
- On-board Ultra low noise 3.3V voltage regulator
- UF.L antenna connectors
- u-center GPS Evaluation Software
- Extensive visualization and evaluation features
- Supports AssistNow Online and AssistNow Offline A-GPS services
- 1 TTL UART port, 1 I2C port, One JST 1mm SH connectors 6pin for I2C, UART)
- Time pulse LED
- I2C EEPROM memory on board for settings save inside in the module (can save settings without battery)
- Battery for HOT module start
- Build-in onboard filters, which reduce noise from motor and other high current electronics
- Oscillator TCXO
- Built-In RTC crystal
- Anti-jamming Active CW detection and removal
- ROM Memory
- Active and passive antenna support
- Navigation update rate: 10Hz
- Position accuracy: 4m
- Receiver type:
56-channel u-blox 7 engine
GPS L1 C/A, GLONASS L1 FDMA,
QZSS L1 C/A,
Galileo E1B/C, Compass ready
SBAS: WAAS, EGNOS, MSAS - Sensitivity GPS / GLONASS:
Tracking: –161 dBm / –158 dBm
Cold starts: –148 dBm / –140 dBm
Warm starts: –148 dBm / –145 dBm - Time GPS / GLONASS:
Cold Start Time: 29s / 30s
Warm Start Time: 28s / 25s
Hot Start time: 1s / 1s - Altitude: 50,000m
- Speed: 500m/s
- Acceleration: 4g
- Pin Number: 7 Pin
- Size: 27mm x 16mm
U-blox MAX-7Q GPS-GNSS Module Items:
- 1 x CJMCU UBLOX MAX-7Q GPS/GNSS Module
- 1 x Antenna
Document:
- MAX-7Q series datasheet Link
gsm+gps+gprs | |
Positioning Accuracy | 4m |
Acceleration | 4g |
Altitude | 50000m |
Channel | 56 Channel |
Cold start Sensitivity | GPS / GLONASS: –161 dBm / –158 dBm |
Cold Start Time | GPS / GLONASS: 29s / 30s |
Core | u-blox MAX-7Q |
Hot Start Time | GPS / GLONASS: 1s / 1s |
speed | 500m/s |
Tracking Sensitivity | GPS / GLONASS: –148 dBm / –140 dBm |
Update Rate | 10Hz (Max) |
Warm start Sensitivity | GPS / GLONASS: –148 dBm / –145 dBm |
Warm Start Time | GPS / GLONASS: 28s / 25s |
Interfaces | |
Interface Type | I2C , UART |
Electrical Parameters | |
Input Voltage | 5V |
Board Parameters | |
Pin Count | 7 Pin |
Physical Parameters | |
Size | 27mm x 16mm |