NRF24L01P PA LNA Wireless Transceiver Module (With Antenna) [2.4GHz]

Description:
NRF24L01P PA LNA Wireless Transceiver Module is a low-cost, high-performance 2.4 GHz, ISM band  wireless transceiver. The nRF24 Series includes the nRF24L, nRF24AP2 and nRF2460 ICs. nRF24L ICs use Nordic Semiconductor's Enhanced ShockBurst protocol (ESB), enables it  to have ultra-low power and high performance communication with low cost host microcontroller. Therefor NRF24L01P is suitable for the ultra long distance data transmission, specially developed high power and high sensitivity. This module is different to nRF24L01, added a 250Kbps data rate, it uses the newer 2.4GHz transceiver IC from Nordic Semiconductor nRF24L01+ (NRF24L01P).
The nRF24L01P is a single chip 2.4GHz transceiver with an embedded base band protocol engine (Enhanced ShockBurst™). The nRF24L01+ is designed for operation in the worldwide ISM frequency band at 2.400 - 2.4835GHz. Because of supporting an air data rate of 250 kbps, 1 Mbps and 2Mbps, NRF24L01P have a high air data rate combined with two power saving modes, so it is very suitable for ultra low power designs. You can use it in your project without any wireless design, simply you need a microcontroller and a few external passive components. You just leave a 8 pin interface to this module, use the SPI interface to control the module on transferring data. 

Features:
IC: nRF24L01+
Frequency: 2.4GHz
Input voltage: 3V ~ 3.6V Max (recommended: 3.3V)
Receiver sensitivity: -92dBm in 2Mbps mode, -95dBm in 1Mbps mode, -104dBm in 250kbps mode
Maximum Transmit power: +20dBm
TX Mode current: 115mA
RX Mode current: 45mA
Sleep Mode current: 4.2
Data Rate: 2Mbps , 1Mbps , 250Kbps
PA growth: 20dB
LAN growth: 10dB
LAN noise figure: 2.6dB
Transmission distance (open) 520m
Operating temperature: -20°C ~ +70°C
Size: 41mm x 15.5mm

Package Include:
1 x NRF24L01P + PA + LNA Wireless Module
1 x Antenna