LSM9DS1 9-DOF iNEMO Inertia Module [3.3V]

LSM9DS1 9-DOF iNEMO Inertia Module [3.3V]
  • Brands CJMCU
  • Product Code:SQ8649
  • Availability: In Stock
  • $7.70
  • Ex Tax:$7.70

Tags: AHRS Module, 9 DOF Sensor, 3 Axis Accelerator, 3 Axis Gyroscope, 3 Axis magnetometer, Digital Sensor, Acceleration Sensor

This module is based on LSM9DS1 that is a system-in-package featuring a 3D digital linear acceleration sensor, a 3D digital angular rate sensor, and a 3D digital magnetic sensor. The LSM9DS1 has a linear acceleration full scale of ±2g/±4g/±8g, a magnetic field full scale of ±4/±8/±12/±16 gauss and an angular rate of ±245/±500/±2000dps. The LSM9DS1 includes an I2C serial bus interface supporting standard and fast mode (100kHz and 400kHz) and an SPI serial standard interface. 
In LSM9DS1 the accelerometer and gyroscope have two operating modes available:
only accelerometer active and gyroscope in power down or both accelerometer and gyroscope sensors active at the same ODR. Switching from one mode to the other requires one write operation: writing to CTRL_REG6_XL (20h), the accelerometer operates in the normal mode and the gyroscope is powered down, writing to CTRL_REG1_G (10h) both accelerometer and gyroscope are activated at the same ODR.
Magnetic, accelerometer and gyroscope sensing can be enabled or set in power-down mode separately for smart power management. The LSM9DS1 is available in a plastic land grid array package (LGA) and it is guaranteed to operate over an extended temperature range from -40°C to +85°C.

Main Chip: LSM9DS1
Input Voltage: 1.9V ~ 3.6V
Output Type: Digital
Acceleration Range: ±2g, ±4g, ±8g
Magnetic Range: ±4gauss, ±8gauss, ±12gauss, ±16gauss
Gyroscope Range: ±245dps, ±500dps, ±2000dps
Acceleration Sensitivity: 0.061mg/LSB ~ 0.732mg/LSB
Magnetic Sensitivity: 0.14mgauss/ LSB ~ 0.58mgauss/ LSB
Gyroscope Sensitivity: 8.75mdps/ LSB ~ 70mdps/ LSB
Resolution: 16 bit 
Interfaces: SPI, I2C
Programmable interrupt generators
Embedded temperature sensor
Embedded FIFO
Position and motion detection functions
Click/double-click recognition
Intelligent power saving for handheld devices
Pin Number: 14 Pins
Operating Temperature: -40°C ~ +85°C
Size: 35mm x 11mm

Indoor navigation
Smart user interfaces
Advanced gesture recognition
Gaming and virtual reality input devices
Display/map orientation and browsing

Package Include:
1 x LSM9DS1 iNEMO Inertia Module

Interface Type I2C , SPI
Sensor Parameters
Gyroscope Range ±245dps, ±500dps, ±2000dps
Magnetometer Range ±4gauss, ±8gauss, ±12gauss, ±16gauss
Output Type Digital
Sensitivity 0.061mg/LSB ~ 0.732mg/LSB (Acceleration), 0.14mgauss/LSB ~ 0.58mgauss/LSB (Magnetic), 8.75mdps/LSB ~ 70mdps/LSB (Gyroscope)
Acceleration Range ±2g, ±4g, ±8g
Resolution 16 bit
Electrical Parameters
Input Voltage 1.9V ~ 3.6V
Board Parameters
Main Chip LSM9DS1​​​​​​​
Pin Count 14 Pins
Physical Parameters
Size 35mm x 11mm
Environmental Conditions and Safety
Operating Temprature -40°C ~ +85°C

Write a review

Note: HTML is not translated!
   Bad           Good
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout