EP-260C 58mm Auto Cutter 2 Inch Thermal Printer [TTL, USB]

Description:

The EP-260C 58mm printer is a thermal Printer equiped with auto cutting, with USB and TLL Interfaces. Thermal printers, are most often used to print your store’s receipts, because of not using any ink, or cartridge of any sort. The paper it prints on turns black when heated. So EP-260C thermal printer , simply applies heat where another printer would apply ink. Eventually the printer head will wear out, but this occurs after several miles of printing. Yes, miles! about 30 of them usually. So, given that the rolls of paper are 34ft long, you can print about 4,600 rolls before the print head dies, meaning for most of us, you will never see that happen.

2 inch Thermal Printer Application:

1. stores
2. libraries
3. food salon

2 inch thermal printer Features:

1. Printing method: Thermal Line Printing
2. Printing speed: 90mm/s | 200mm/s
3. Resolution: 203dpi (8dots/mm)
4. Printing width: 48mm
5. Character Set: ANK, GB2312 (Chinese)
6. Print Font: ANK: 9×17,12×24, Chinese: 24×24
7. Character per line: Font A: 32; Font B:42
8. Character Flash: 2M byte
9. MCU Flash 128KB
10. MCU SRAM 20KB
11. Paper Type Thermal Paper
12. Paper Width: 57.5±0.5mm
13. Paper Thickness: 55-90μm
14. Paper Roll Diameter: Max:60mm
15. Roll Core Inner Diameter: 13mm (min)
16. TPH: 100km or more (12.5% print ratio)
17. Cutter: 1,000,000 cuts or more
18. Cutting Method: Full and Partial cut
19. Interface: Serial (TTL) +USB
20. Power Supply: DC5-9V, 3A
21. 1D Barcode: UPC-A, UPC-E, EAN-13, EAN-8, CODE39, ITF25, CODABAR, CODE93, CODE128
22. 2D Barcode: PDF417, QR Code
23. Outline Dimension (WxLxH): 102×115.5×66mm
24. Installation Port Size (WxL): 96.3×110mm
25. Insert Depth: 56mm

Document:

1. 58mm thermal printer work Link