MAX3232 Female RS232 to TTL Converter Module

Description: 
This module is based on a MAX3232 device that consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial port connection terminals, including GND). 
The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial port connector. The charge pump and four small external capacitors allow operation from a single 3V to 5.5V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/μs driver output slow rate. This module can be used to the serial port of the microcontroller module to expand DVD, router, hard drive and other equipment for the upgrade. It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU.

Features:
Chip: MAX3232
Operating Voltage: 3.3V ~ 5V
Operating Current: 6mA
Baud rates: Up To 250kbps
Interface: TTL, RS232
Port: Female DB9
Pin Number: 4 Pins
Size: 33mm x 15mm

Package Include:
1 x MAX3232 Female RS232 to TTL Converter Module