ESP01S Wifi Module

 ESP01S Wifi Module
  • Product Code:SQ2097
  • Availability: In Stock
  • $2.00
  •  
  • Ex Tax:$2.00
This product has a minimum quantity of 2
+
-


Tags: ESP-01S, ESP8266, WIifi module

Description:
The ESP-01S ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP-01S ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers. The ESP-01S wifi module is an extremely cost effective board with a huge, and ever growing, community.

This module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF parts.
Note: The ESP8266 Module is not capable of 5-3V logic shifting and will require an external Logic Level Converter. Do not power it directly from your 5V development board or USB interface cable.
ESP8266 ESP01S wifi module Application:
  1. IOT
  2. Remote control
  3. smart devices

ESP8266 ESP01S Wifi module Features:
  1. 802.11 b/g/n
  2. Wi-Fi Direct (P2P), soft-AP
  3. Integrated TCP/IP protocol stack
  4. Integrated TR switch, balun, LNA, power amplifier and matching network
  5. Integrated PLLs, regulators, DCXO and power management units
  6. +19.5dBm output power in 802.11b mode
  7. Power down leakage current of <10uA
  8. 1MB Flash Memory
  9. Integrated low power 32-bit CPU could be used as an application processor
  10. SDIO 1.1 / 2.0, SPI, UART
  11. STBC, 1×1 MIMO, 2×1 MIMO
  12. A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  13. Wake up and transmit packets in < 2ms
  14. Standby power consumption of < 1.0mW (DTIM3)

Documents:
  1. ESP01 programming Link
  2. ESP01 datasheet Link
  3. ESP01 Arduino Link
ESP WIFI
Flash 1MB
Freq 2.4GHz
MCU ESP8266
Physical Parameters
Size 25mm x 15mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout